VALVES

Ball Valves

We supply these in 1 piece Brass Nickel Plated, 1, 2 or 3 piece Stainless Steel, double union or single union ended in Plastic and 3 piece Carbon Steel.

Brass Nickel Plated

• ¼” – 4” Screwed BSP

• Quarter turn on/off valve

• Flat steel lever

• Full bore

​

General Purpose (water and oil)

• PTFE seats and seals

• Red plastic insulation sleeve

• Threaded end connections to BSPP

​

British Gas Approved (gas)

• Certified to EN:331-1998

• Internally assembled anti blowout stem design

• PTFE seats

• Viton stem seals

• Yellow plastic insulation sleeve

• Locking device

• Threaded end connections to BSPT taper thread

​

Compression ended

• Rated to 40 Bar on 15mm, 22mm and 28mm fittings

• Internally assembled anti blowout stem

• PTFE seats

• Viton seals

• Supplied with compression end fittings for metric piping

​

Stainless Steel

• ¼” – 2” Screwed BSP

•  Quarter turn on/off

• Blow out proof stem

• Investment casting body

• Screwed BSP ends

• Locking device

• Rated to 1000psi (69 Bar)W.O.G.

• 1 piece: reduced bore

• 2 piece: full bore

• 3 piece: full bore, screwed or socket weld ends, mounting pad

​

Plastic

• 3/8” – 4” Plain ABS or UPVC

• Quarter turn on/off valves

• Standard valve comes with EPDM seals, other seals are available to order

• Plain ends or BSP screwed available

• EFFAST, more detail available from their catalogue – available on request

• ASB double union ended: industrial ball valve 

• UPVC double union ended: available as industrial or economy

• UPVC single union ended: only available as economy

​

Carbon Steel

• ¼” – 4”

• 3 piece

• Socket weld or screwed ends

• 69 Bar Pressure rating

• PTFE seals

• Full bore

• Locking device

​

N.B. Also available fire safe and anti-static

​

Gate Valves

We supply these in Brass and Gun Metal, Cast Iron and Cast Steel and Stainless Steel.

Brass

• ½” – 4”

• Full bore

• To BS5154 PN20 Rated

• End connections BSP taper female

• Hattersley and Crane in stock

• Other makes available

Gun Metal

• 1/4” – 4” Screwed and Flanged from ½”

• To BS5154

• PN20 / PN32 Pressure ratings

• Screwed BSP taper ends

• Flanged ends to either BS10 / BS4504

• Wheel head and lock shield available

​​

Cast Iron

• 11/2” – 12”

• Available in BS10 / BS4504 flanging

• Inside screw non rising stem

• 6 Bar / 16 Bar Pressure ratings

• Hattersley and Crane in stock

• Other makes available

​​

Cast Steel

• 2” – 8”

• Flanged to BS4504 and ASA150

• Cast steel body bonnet and wedge

• Seats hard faced

• Rising stem

​​

Stainless Steel

Screwed ½” – 2”

• Flanged to BS4504 and ASA150

• Cast steel body bonnet and wedge

• Seats hard faced

• Rising stem

Flanged ½” – 4”

• Flanged PN16 and ASA150

• Body, bonnet, wedge to ASTM A351 CF8M

• Stem, disc, seat ring, gland Stainless Steel 316

• Gasket PTFE, bolted bonnet

Globe Valves

Hattersley and Crane in stock, others makes available

​

Gun Metal

Screwed 3/8” – 2”

• BSP screwed ends

• Raising stem

• Metal seats

• Working pressures 16 Bar at 20°C 12 Bar at 200°C

Flanged ½” – 3”

• BS10 / BS4504

• Raising stem

• Screwed bonnet

• Metal seats

​​

Cast Iron

• 2” – 12”Flanged

• Flangings BS10 / BS4504

• Outside screw

• Raising stem

​​

Cast Steel

• 1” – 8” Flanged

• Screwed available 3/8” – 2” NPT Thread as standard

• Flanging BS4504 and ASA150

• Body GS-C25

• Disc and stem X20 CR13

• Disc and body seat Stainless Steel 304

​​

Stainless Steel

Screwed ½” – 2”

• Class 200 W.O.G.

• Investment casting ASTM A351 Gr-CF8M

• Inside screw and screwed bonnet, swivel disc

• Integral seat

• Rising stem and hand wheel

Flanged ½” – 4”

• Flanged BS4504 and ASA150

• Body and bonnet ASTM A351 CF8M

• Stem disc, seat ring and gland Stainless Steel 316

• Gasket PTFE, bolted bonnet

Check Valves

​

Brass

• 3/8” – 6”Screwed

• PN16 Rated

• Metal to metal seats

• Temperature range -10°C to +100°C

​

Gun Metal

Screwed ¼” – 3”

• BS5154 PN25

• Horizontal swing pattern

• Metal to metal seats

• Suitable for horizontal and vertical use

Flanged ½” – 4”

• BS5154 PN16

• Flanging BS5404 / BS10 / Class 150

• Horizontal lift pattern

Cast Iron

• 11/2” – 12”Flanged

• Flanged BS4504 / ASA150

• Horizontal swing pattern

• Copper alloy trim

• Suitable for horizontal or vertical use

Cast Steel

• 1” – 10” Flanged

• Flanging BS4504 / ASA150

• Lift pattern

Stainless Steel

Screwed ½” – 2”

• Class 200 W.O.G.

• Investment casting ASTM A351 Gr-CF8M

• Swing type disc

• Integral seat

Flanged ½” – 6”

• Flanging BS4504 / ASA150

• Body and bonnet ASTM A351 CF8M

• Gasket PTFE bolted bonnet

• Swing type disc

Y Type Strainers

​

Other strainers available on request

​

Brass

• ½” – 4” Flanged

• Stainless Steel screen

• Rated PN16

• Maximum service temperature 110°C

Gun Metal

Screwed ½” – 2”

• Stainless steel screens

• PN32 rated from -10° to 100°C

Flanged ½” – 6”

• Stainless steel screens

• 25 Bar rated from -10°C to 100°C

• Flangings BS4504

Cast Iron

Screwed ½” – 3” SG Iron

• Stainless Steel screens

• Body and cap SG Iron

• PN25 rated

Flanged 2” – 24”

• Stainless steel screens

• Flangings BS4504

Cast Steel

Screwed ½” – 2”

• Stainless steel screens

• PN40 rated

Flanged ½” – 10”

• Stainless steel screens

• Flangings ASA150 / 300

Stainless Steel

Screwed ¼” – 2”

• Class 600 W.O.G.

• Investment casting ASTM A351 Gr-CF8M

• Maximum working temperature 230°C

Flanged ½” – 4”

• Flangings BS4504 / ASA150

• Maximum temperature 230°C

Miscellaneous Valves

​

We can also supply the following valves at request:

• 
  

   Butterfly Valve

• Under and Over Check Valve

• Relief Valve

• Safety Valve

• Knife Gate Valve

• 
  

  Pinch Valve

• Spring Loaded Check Valve

• 
  

  Ball o Fix Valve

• Ball Float Valve

• Wafer Type Check Valve

• Duo Check Valve

• Needle Valve

• Solenoid Valve

• 
  

   Water Meters

• 
  

  Actuated Valve

• Diaphragm Valve

• Hose Union BIB Taps

Plus many more…